Monday, 4 December 2017

End of my CRT search.

I spotted this set ( a BVM 2011p) on Trademe and thought to myself "That is 8 years you been waiting for this CRT, 8 years...." so I had to have it. Unfortunately, I was out bided by $6 but relatively new players on the retrogaming circuit..at $756NZD I thought they can keep it. 2 days later I had an email from the seller describing the dissatisfaction of the transaction and ghost bidding what not. 
I offered a relatively comfortable price for him and we made the deal. Suffice to say I was over the moon and excited over the prospect of owning one of these finally.
The first impression  I got of it was it was really really big for a 20" monitor. It could easily been 2 14" mashed together and still room for a videogame console.



After fluffing about for a day, I came to the conclusion that it only accepts C-Sync ( Raw Sync, Pure Sync, Video Sync...) and you can not use composite video for the sync. Most of the information about the required quality of the sync input is not well documented with people feeding sync into the green input tomfoolery. I put my MVS on the monitor through a supergun that only outputs video sync for case and point.


World heroes never looked so good. It is a quality game that does not take itself seriously.




Next I pulled up the internal geometry test screen. Its perfect.


Now to use something I got many moons ago...my Sync Strike! Basically it draws the required power to enable the sync stripping circuit to work from the SCART cable from the console and you can output C-Sync or H-Sync/V-Sync if you so inclined. I can not exactly remember why I got it but I am happy now that I did. The cool thing about it is you can output 2 sets of video signals from the one source...so I might chain it to the smaller 9" PVM I have that seems to be fussy with sync as well. The BVM also lacks audio input/output. So I will output the audio through the phono plugs from the Sync Strike.


Some MD action here:














Drills and Coin Mechs.

A friend suggested I should install coin mechs for the cabinets. One of the cabinet has accessible coin door while the other two not so much as I don't have the keys for them. 
The only option is to drill the locks rather than guessing what keys they take, plus one of the locks has already been pilot drilled so there is no point to get the keys.
The aim of the exercise is to obliterate the shaft that holds the locking tongue so in effect the lock will snap off at that point. The whole process is pretty painful and stressful as the coin counter housing is pretty close to the lock and I also wanted to preserve the locking tongue for the replacement locks.
What I learnt is that the drilling process requires periodic cooling to retain the strength and sharpness of the drill bits and also to change up the diameter...things I could of been told instead of just "drill it out in the middle" as people put it.


To my shock one of the cabinet is missing the coin chute and luckily I found someone selling what I need across the ditch.


Keeping things OG...








Monday, 6 November 2017

An appointment with an old friend...

I had an opportunity to get some private photos with an old friend of mine. We played with the lighting and angles in the game room to see what type of shots we can get from it.























Monday, 30 October 2017

Party like it's 1999, conclusion of non-JAMMA boards test and gameroom overview

First on the bench today is '99 -the last war AKA SEGA's Repulse. A space invaders clone with forward movement and scaling! And like the late pop singer, its gone to heaven before I could get it going.




Finally, I have Storming Party AKA L.S.A (Land, Sea, Air) by TAITO. The opening music is awesome, pretty punching for a game that era. Lots of vehicles to ride!!





Current state of gameroom: Vacancy: Zero, Status: 100%



Sunday, 29 October 2017

More archaic boards to the test...

The saga continues with the next 3 boards. First on the bench is Get Star by Taito. It was during these times the online resources are becoming increasingly vague with which pins is the Speaker + and the Speaker -. I decided that statistically, the Speaker + is on the Component side and the Speaker - is on the Solder side.

If you ever wondered how Altered Beast is like in space? This is it.




Bemler from the Ultraman universe makes a cameo.


Next is a curly one. On first glance I can see "Tut" written on the harness, which I assumed is for Tutankham (an early Konami release...cool) and on the top board its written "Space Alot" (which was Space Pilot later on...) and only noticed a silk screen Taimu-Paylot.



And the money shot! And yes, I will try this game thank you very much.



Finally for the night, I had an early game developed by Seibu Kaihatsu. Its Knuckle Joe, or as I like to call it, Hokuto no Thunder. I haven't given it a good go, but these twitchy reflex games have a certain charm to them.